&uart0 {
        status = "okay";
        compatible = "nordic,nrf-uarte";
        current-speed = <9600>;
        pinctrl-0 = <&uart0_default>;
        pinctrl-1 = <&uart0_sleep>;
        pinctrl-names = "default", "sleep";
};

&pinctrl {
        uart0_default: uart0_default {
                group1 {
                        psels = <NRF_PSEL(UART_TX, 0, 11)>,
                                <NRF_PSEL(UART_RX, 0, 12)>,
                                <NRF_PSEL(UART_RTS, 0, 15)>,
                                <NRF_PSEL(UART_CTS, 0, 16)>;
                };
        };

        uart0_sleep: uart0_sleep {
                group1 {
                        psels = <NRF_PSEL(UART_TX, 0, 11)>,
                                <NRF_PSEL(UART_RX, 0, 12)>,
                                <NRF_PSEL(UART_RTS, 0, 15)>,
                                <NRF_PSEL(UART_CTS, 0, 16)>;
                        low-power-enable;
                };
        };

        i2c0_default: i2c0_default {
                group1 {
                        psels = <NRF_PSEL(TWIM_SDA, 0, 4)>,
                                <NRF_PSEL(TWIM_SCL, 0, 3)>;
                };
        };

        i2c0_sleep: i2c0_sleep {
                group1 {
                        psels = <NRF_PSEL(TWIM_SDA, 0, 4)>,
                                <NRF_PSEL(TWIM_SCL, 0, 3)>;
                        low-power-enable;
                };
        };
};

&i2c0 {
        status = "okay";
        pinctrl-0 = <&i2c0_default>;
        pinctrl-1 = <&i2c0_sleep>;
        pinctrl-names = "default", "sleep";
        bme280@76 {
		      compatible = "bosch,bme280";
		      reg = <0x76>;
	      };
};