; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[platformio]
;default_envs = esp32_cc1101
default_envs = esp32c3_cdc_cc1101
;default_envs = rp2040
boards_dir = boards

[libraries]
arduinolog = https://github.com/1technophile/Arduino-Log.git#d13cd80
arduinojson =
  ArduinoJson
  ; ArduinoJson @ 7.0.4
  ; ArduinoJson @ 6.21.5
  ; ArduinoJson @ 5.13.4  ; deprecated
rtl_433_ESP = shchuko/rtl_433_ESP

[env]
framework = arduino
monitor_filters = esp32_exception_decoder
;platform = espressif32@3.5.0
platform = espressif32@6.1.0
lib_ldf_mode = deep+
lib_deps = 
  sui77/rc-switch
  ${libraries.arduinolog}
  ${libraries.arduinojson}
  ${libraries.rtl_433_ESP}

[env:esp32c3_cdc_cc1101]
board = esp32-c3-devkitm-1
build_flags =
  '-DCONFIG_ESP_CONSOLE_UART=1'	; settings for esp32c3 without uart
  '-DARDUINO_USB_MODE=1'
  '-DARDUINO_USB_CDC_ON_BOOT=1'
  '-DLOG_LEVEL=LOG_LEVEL_TRACE'
;  '-DONBOARD_LED=13'           ; LED_D4
; *** rtl_433_ESP Options ***
;  '-DRF_MODULE_FREQUENCY=915.00'
  '-DOOK_MODULATION=true'      ; False is FSK, True is OOK
;  '-DRTL_DEBUG=4'              ; rtl_433 verbose mode
;  '-DRTL_VERBOSE=74'          ; LaCrosse TX141-Bv2, TX141TH-Bv2, TX141-Bv3, TX141W, TX145wsdth sensor
;  '-DRAW_SIGNAL_DEBUG=true'   ; display raw received messages
;  '-DMEMORY_DEBUG=true'   ; display memory usage information
;  '-DDEMOD_DEBUG=true'  ; display signal debug info
;	'-DMY_DEVICES=true'		; subset of devices
;  '-DPUBLISH_UNPARSED=true'   ; publish unparsed signal details
  '-DDISABLERSSITHRESHOLD=true'
  '-DMINRSSI=-82'
;  '-DMINRSSI=-60'
;  '-DRSSI_THRESHOLD=12'         ; Apply a delta of 12 to average RSSI level
;  '-DAVERAGE_RSSI=5000'     ; Display RSSI floor ( Average of 5000 samples )
;  '-DSIGNAL_RSSI=true'             ; Display during signal receive
;  '-DOOK_MODULATION=false'       ; False is FSK, True is OOK
; *** RF Module Options ***
  '-DRF_CC1101="CC1101"'  ; CC1101 Transceiver Module
  '-DRF_MODULE_CS=21'      ; pin to be used as chip select
  '-DRF_MODULE_GDO0=6'   ; CC1101 pin GDO0
  '-DRF_MODULE_GDO2=5'    ; CC1101 pin GDO2
  '-DRF_MODULE_INIT_STATUS=true'    ; Display transceiver config during startup
; *** RadioLib Options ***
;  '-DRADIOLIB_DEBUG=true'
;  '-DRADIOLIB_VERBOSE=true'
; *** FSK Setting Testing ***
;  '-DsetBitrate'
;  '-DsetFreqDev'
;  '-DsetRxBW'
targets = upload
monitor_port = /dev/ttyACM0
monitor_speed = 115200
upload_port = /dev/ttyACM0
monitor_filters =
  default   ; Remove typical terminal control codes from input
  time      ; Add timestamp with milliseconds for each new line
;  log2file  ; Log data to a file “platformio-device-monitor-*.log” located in the current working directory